寶山基地一號高爐大修改造環縫洗滌裝置招標公告

**基地一號高爐大修改造環縫洗滌裝置招標公告

發布日期：2024-10-17

招標編號：****

招標編號（國際招標網）：0721-****030G0195

****（以下稱招標機構）受****（以下稱買方）委托，****基地一號高爐大修改造環縫洗滌裝置所需的下列貨物進行公開招標，邀請合格投標人進行網上電子投標。

標段編號：****/01

標段名稱：**基地一號高爐大修改造環縫洗滌裝置

1．招標貨物名稱、數量、技術規格和資金來源：

招標貨物名稱：環縫洗滌裝置

數量：1套

技術規格：

投標人技術方案應具有合理性和完整性，所采用的工藝技術應是成熟可靠的，能耗應體現先進性和節能性，相應的工藝、儀表、電氣設備等應配套完整，在工作環境下能正?？煽渴褂?，本招標書設備及服務招標范圍如下：

a) 投標人所供設備的基本設計、詳細設計及煤氣凈化系統的基本設計。

b) 環縫洗滌器組件，每套組件包括上部連接管、耐磨保護罩、文丘里形外殼、內錐體、驅動桿、干油集中潤滑裝置、帶位置控制器的液壓缸等。

c) 預洗滌段和環縫洗滌段的噴嘴。

d) 預洗滌段和環縫洗滌段的液動排水控制閥組。

e) 用于環縫洗滌器、排水控制閥的成套液壓設備（含獨立的控制系統）。

f) 干油潤滑自動充填裝置。

g) 高壓冷凝水排水裝置。

h)相關的電控和儀表設備。

對裝置本體及附屬設備的總體要求如下：

(1) 環縫洗滌器及配套裝置應安全可靠，不能影響高爐的操作；

(2) 環縫洗滌器在正常使用條件下的壽命應不少于一代爐齡（≥18年）；

(3) 在一代爐齡內不能因灰塵堵塞、煤氣清洗設備腐蝕等問題導致的專門維護檢修，引起高爐休風。

(4) 環縫洗滌器一般保持恒壓差操作，其值可調，但配套的液壓設備應具有環縫全行程工作的能力。

(5) 配置環縫洗滌器、排水控制閥液壓驅動裝置服務的液壓站。用于驅動環縫洗滌器、排水控制閥閥臺布置在現有液壓站內（現有液壓站距環縫洗滌塔直線距離50~70米，液壓站內為非防爆區）;油泵、油箱及循環冷卻加熱裝置、蓄能器布置在現有液壓站內（非防爆），但布置在煤氣設施外緣3米范圍內的電氣設備要求防爆。

（6）環縫洗滌段及脫水器排水要求排入現有高架水槽內，通過高架水槽送至水處理，現有高架水槽底部相對標高4.85m。

上述設備均由投標人成套供貨，在調試階段所有因非招標人原因造成損壞元器件均由投標人免費提供。

其他要求詳見招標文件技術部分。

資金來源：現匯項目

2. 交貨地點和交貨時間：

交貨地點：國外設備：CIF**；國內設備：**基地1號高爐項目現場

交貨時間：國外設備：2025年8月30日FOB； 國內設備：2025年9月30日DDP**基地1號高爐項目現場

3.*凡確認投標的投標人請登錄中國國際招標網平臺（http://www.****.com），務必在開標前注冊為其會員并通過年檢以獲得投標資格，中標情況將在中國國際招標網公示。

寶華智慧招標共享平臺(https://www.****.com)和中國招標投標公共服務平臺(http://bulletin.****.com/****公司的招標項目信息（邀請招標除外），有興趣的投標人可以登錄查看。登錄后，投標人可在寶華智慧招標共享平臺上購買招標文件進行投標和開標活動。

4. 購買招標文件時間：2024年10月18日起到2024年10月25日止。

5. 招標平臺使用費：招標文件英文版及中文版一套（電子版），若中文和英文版有沖突以中文版為準。

1,500.00元人民幣或250.00美元整。

招標文件均按標段進行計價出售，投標人成功購標后，自行下載招標文件和投標文件模板。招標文件一經售出不得退還。

6. 投標截止時間和開標時間：2024年11月08日09時00分（**時間）。投標人應于投標截止時間前在寶華智慧招標共享平臺成功遞交所有電子投標文件。

7. 開標方式：一步法。

8. 開標地點：寶華智慧招標共享平臺電子開標大廳。

9. *對投標人的資格要求：

（1）未被國家企業信用信息公示系統(www.****.cn)列入嚴重違法失信企業名單（如適用）;

（2）未被“信用中國”網站(www.****.cn)列入失信被執行人名單（如適用）;

（3）由于項目復雜，技術要求高，投標人均應在開標前與招標人聯系開展技術交流并簽訂技術協議。未能簽訂技術附件的投標人，其投標將被否決。若簽訂的技術附件與招標文件的技術要求有差異，以招標文件為準。****中心聯系人：譚金軍，聯系方式：（電話） 137****9820，（郵箱）****@baosteel.com。

（4）本項目不接受代理商投標。

（5）投標人應具有高爐煤氣環縫洗滌裝置的供貨業績。

10. 本項目不接受聯合體投標。

11.招標人相關信息：

招標人聯系人：譚金軍

招標人郵箱：****@baosteel.com

招標人電話：173****2301

12. 未領購招標文件的不得參加投標。

13. 客服熱線：****800060 （有關投標人CA辦理事項的咨詢）

傳 真：021-****1125

網上購標方法：具體操作方法詳見寶華招標網“操作指南”。

項目經理：胡冬艷 （有關商務、技術問題或招標文件異議可致電項目經理。）

電 話：021-****1034

電子郵件：****@baosteel.com

業務咨詢：021-****1080（業務咨詢電話3）

招標機構地址：**市**區**路550弄8號樓

購標時人民幣付款采用第三方支付，外幣付款可以匯款到相應外幣賬戶內

開戶銀行（外幣）：建行寶鋼**支行

收 款 人：****

賬 號：

美元：310********229110041

Swift Code： PCBCCNBJSHX

Annular Gap Scrubbing Unit of Baoshan Base No.1 Blast Furnace Overhaul and Revamping Project

Issue Date：2024-10-17

Tendering No：****

Tendering No. (China International Bidding Website):0721-****030G0195

Shanghai Baohua International Tendering Co., Ltd.(Hereinafter referred to as Tendering Agency) is commissioned by Baoshan Iron Steel Co., Ltd(Hereinafter referred to as tenderer) on Open Tendering for the following goods required in Annular Gap Scrubbing Unit of Baoshan Base No.1 Blast Furnace Overhaul and Revamping Project invites eligible bidders to online e-bidding.

Bid section No：****/01

Bid section Name：Annular Gap Scrubbing Unit of Baoshan Base No.1 Blast Furnace Overhaul and Revamping Project

1． The name, quantity, technical specifications and fund sources of goods for tendering：

The name：Annular Gap Scrubbing Unit

Quantity：1 set

Technical specifications：

The technical scheme of bidders should be reasonable and complete. The process and technology adopted should be mature and reliable. Energy consumption should reflect advanced nature and energy saving. The corresponding processes, instruments, electrical equipment, etc. should be completely matched and can be used normally and reliably in the working environment. The scope of equipment and service bidding for this bidding document is as follows:

a) The basic design and detailed design of the equipment supplied by the bidder and the basic design of the gas purification system.

b) Annular gap scrubber components. Each set of components includes upper connecting pipe, wear-resistant protective cover, Venturi-shaped shell, inner cone, drive rod, centralized grease lubrication device, hydraulic cylinder with position controller, etc.

c) Nozzles for the pre-washing section and the annular gap washing section.

d) Hydraulic drain control valve group for pre-washing section and annular gap washing section.

e) Complete set of hydraulic equipment (including independent control system) for annular gap scrubber and drain control valve.

f) Automatic filling device for grease lubrication.

g) High-pressure condensate drainage device.

h)Related electrical control and instrumentation equipment.

The general requirements for the device body and ancillary equipment are as follows:

(1) The annular gap scrubber and supporting devices should be safe and reliable and cannot affect the operation of the blast furnace;

(2) The service life of the annular gap scrubber under normal use conditions should be not less than one generation of furnace campaign (≥18 years);

(3) During the campaign of one generation of the blast furnace, there should be no special maintenance and repair caused by problems such as dust blockage and corrosion of gas cleaning equipment that leads to the shutdown of the blast furnace.

(4) The annular gap scrubber generally maintains constant pressure difference operation, and its value is adjustable. However, the supporting hydraulic equipment should have the ability to work over the full stroke of the annular gap.

(5) Configure a hydraulic station that services the hydraulic drive device for the annular gap scrubber and drain control valve. The valve stations for driving the annular gap scrubber and drain control valve are arranged in the existing hydraulic station (the linear distance between the existing hydraulic station and the annular gap scrubber tower is 50-70 meters. The hydraulic station is a non-explosion-proof zone ). The oil pump, oil tank, and circulating cooling and heating device, and accumulator are arranged in the existing hydraulic station (non-explosion-proof). However, electrical equipment arranged within 3 meters of the outer edge of gas facilities requires explosion-proof.

(6) The drainage of the annular gap washing section and dehydrator is required to be discharged into the existing elevated water tank and sent to water treatment through the elevated water tank. The relative elevation of the bottom of the existing elevated water tank is 4.85m.

All the above equipment is supplied in sets by the bidder. During the commissioning stage, all components damaged due to reasons other than those of the tenderee shall be provided free of charge by the bidder.

Please refer to technical part for other requirements.

Fund sources of goods：Cash items

2. Delivery time and place：

Delivery time：for imported parts: Aug.30, 2025 (FOB). for local supplied parts: Sep.30 (DDP: at the site of blast furnace No.1 overhauling project in Baoshan base)

Delivery place：for imported parts: CIF shanghai. for local supplied parts: at the site of blast furnace No.1 overhauling project in Baoshan base

3. *The bidders who have confirmed to participate the bid must log on China International Bidding Website (http://www.****.com), and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website.

Baohua E-bidding website (http://www.****.com) and China Tendeing Bidding Public Service Platform (http://bulletin.****.com) could also provide the information about tendering project of our company (except invitation of tendering), interested bidders may login to view relevant information. After login, the bidder could purchase tendering document and bid online.

4. Time for purchasing Tendering documents: Starting from：2024-10-18 to 2024-10-25 (Beijing time).

5. Sales prices of the tendering document: One complete set of Tendering Documents both in English and Chinese ( electronic version included). The Chinese language shall govern in case of any discrepancy between Chinese language and the English language.Sales price is 1,500.****.00USD

All tendering documents will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The tendering documents sales are non-refundable.

6. Deadline for bid submission and Bid Opening Time：2024-11-08 09:00(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline.

7. Bid opening method ：One-step of opening。

8. E-bid opening place：Bid opening hall on Baohua Intelligent Bidding Integrated Platform。

9. *Requirements of Bidder’s qualification：

(1) Not been listed in the list of seriously illegal and dishonest enterprises by the National Enterprise Credit Information Publicity System (www.****.cn)(if applicable).

(2) Not been included in the list of persons subject to enforcement for trust-breaking on the website of "Credit China" (www.****.cn)(if applicable).

(3) Due to the complexity of the project and high technical requirements, all bidders interested in the participation in this project shall contact the tenderee for technical communication and conclude the technical agreement with the tenderee before the bid opening. Bids from bidders who fail to conclude the technical attachment will be rejected. If there is any difference between the signed technical appendices and the technical requirements of the tender document, the tender document shall prevail. Contact for technical communication: Mr. Tan Jinjun, the ontact person of Equipment Procurement Center, Tel: 137****9820; Email: ****@baosteel.com).

(4) Don't accept the agent bid.

(5) The bidder should have the supply performance of gas annular gap Scrubbing Unit.

10. This project consortium bidding is not accepted

11.Information about the tenderer：

Tenderer contact：譚金軍

Tenderer's mailbox：****@baosteel.com

Tenderer telephone：173****2301

12. Tel：****800060 (consulting for bidders CA affairs)

Fax：021-****1125

Online tendering document purchase: please refer to "HELP" for details on Baohua tendering website.

Bid manager： (contact project leader for commercial, technical problems of tendering project, or objections to tendering documents)

Tel：021-****1034

E-mail：****@baosteel.com

Bussiness Consulting Tel： 021-****1080（Bussiness Consulting Tel 3）

Bid agency address：No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China

When purchasing the tendering document, the payment in RMB shall be made by the third party, and the payment in foreign currency can be remitted to the corresponding foreign currency account.

Bank account：China Construction Bank, Baoshan Baosteel Branch

Beneficiary：Shanghai Baohua International Tendering Co., Ltd.

Account Number

USD：310********229110041

Swift Code： PCBCCNBJSHX